Dakota Alert

The DCRH-4000 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the DCR-4000 receiver up to 1 mile away*. The transmitter is weatherproof and meant for exterior locations.

Expand your Dakota 4000 series driveway alarm or alert system by adding the DCHT4000 rubber hose sensor with wireless transmitter. Place the included 25 foot rubber hose where you expect to detect vehicles. The rubber hose connects to the wireless transmitter which can be mounted on a wall, pole or tree.

The SBA-4000 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Each beam unit has two solar panels to help ensure proper charging throughout the day.

The SBA-4000 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Each beam unit has two solar panels to help ensure proper charging throughout the day.

The SBB-4000 is a solar powered wireless infrared break beam sensor that is simple to install and requires no wiring. This sensor is an add-on sensor for the SBA-4000 or any other systems using the DCR-4000. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Each beam unit has two solar panels to help ensure proper charging throughout the day.

The BS kit consists of one MURS Alert transmitter and one M538-BS base station transceiver. This kit is ideal for use in fixed locations, such as homes, shops or offices. The MURS Alert transmitter is a revolutionary new trail monitoring system. The MURS Alert transmitter is a passive infrared sensor that can be mounted on a tree or a post to monitor activity at remote locations.

The HT kit consists of one MURS Alert transmitter and one M538-HT hand-held transceiver. This kit is ideal for people that are out and about, such as security guards, sales staff, and outdoorsmen. MURS Alert Transmitter The MURS Alert transmitter is a revolutionary new trail monitoring system.

The MURS Alert transmitter is a revolutionary new trail monitoring system. The MURS Alert transmitter is a passive infrared sensor that can be mounted on a tree or a post to monitor activity at remote locations. When the MURS Alert detects people, vehicles, or large animals, it will send an alert signal to either the M538-BS or M538-HT transceivers.

This 6" bell can be used with any Dakota driveway alarm. This bell can be used outside, but may also be used inside for those with hearing problems. The bell will sound similar to a fire bell or school bell. WARNING: Cancer and Reproductive Harm - www.

This siren can be activated by any Dakota Alert driveway alarm, and it can be used outside or placed inside for people with hearing problems. This will be very loud, similar to a police siren. WARNING: Cancer and Reproductive Harm - www.

The DVR-01 uses a PIR detector and a digital video recorder to record 30 seconds of video and audio every time a person passes in front of the sensor. The DVR stores the video on a Micro SD card (4GB card included). Simple to use and battery operated, the camera can be set up instantly in nearly any location.

Extra probe fore Dakota Alert Vehicle Sensor. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Extra probe fore Dakota Alert Vehicle Sensor. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Extra probe fore Dakota Alert Vehicle Sensor. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

The BS kit consists of one MURS Alert transmitter and one M538-BS base station transceiver. This kit is ideal for use in fixed locations, such as homes, shops or offices. MURS Alert MAT Transmitter The MURS Alert transmitter is a revolutionary new trail monitoring system. The MURS Alert transmitter is a passive infrared sensor that can be mounted on a tree or a post to monitor activity at remote locations.

The M538-HT is a hand-held MURS transceiver that will receive alert signals from the MURS Alert transmitter and also can be used for two-way voice communications between other MURS transceivers. WARNING: Cancer and Reproductive Harm - www.

The MURS Chime is an auxiliary chime that can be connected to the M538-BS transceiver. The chime module connects to the N/O relay output on the base station, and will play one of three tunes (Westminster Chime, London Bridges, or Oh, My Darling) when the base station receives a signal from the MURS Alert transmitter.

We have often been asked if the exterior case for the driveway alarms can be camouflaged. Now with the wooden birdhouse facade, that is easily accomplished. The birdhouse slides over the top of the following sensors: WMT, WPT, WHT, MAT and MAPS and will help to hide the sensor from prying eyes.