Water Monitoring (EnviroAlert)

When integrated into a security system, or used as a stand-alone solution, the EAPro®-Gateway provides real-time monitoring and alerting of up to 34 zones impacting environment-dependent assets such as temperature, humidity, water, and gases. As part of the cloud-based solution, the EAPro®-Gateway and all associated wired and wireless sensors can be managed remotely from INSIGHT.

Wireless humidity sensor for use with the EAPro-GTWY. Monitors ambient room humidity. Humidity sensing range of 5% to 95%. 1000' (305 m) line-of-sight transmission distance. Up to 1 year battery life.

The EAPro-ULS is designed to allow for a larger range of temperature sensing. The range is -148°F to +257°F (-100°C to +125°C) with an accuracy of±3.6°F (±2.0°C).

Monitor two zones with one on-board temperature sensor and an additional remote temperature, humidity or water sensing probe. If temperatures and/or humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor, the designate relay for each zone will activate an alarm, dialer, siren, etc.

Monitor two zones with one on-board temperature sensor and an additional remote temperature, humidity or water sensing probe. If temperatures and/or humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor, the designate relay for each zone will activate an alarm, dialer, siren, etc.

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug sensor the designated relay for eachzone will activate an alarm, dialer, siren, etc.

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug sensor the designated relay for eachzone will activate an alarm, dialer, siren, etc.

* This unit has been discontinued by the manufacturer. The replacement is the EAPro-GTWY.

Monitor environmental conditions over the Internet with the Winland EnviroAlert EA800-ip Monitoring Console, 8 Zones. This advanced IP critical conditioning monitoring system supports up to eight sensors (sold separately) and allows remote access through a fee based online portal, providing a convenient way to view real-time data and history, and adjust your settings accordingly.

The standard surface water probe is unsupervised and can be connected to the full line of WaterBug products only. Alarm will sound when water is detected but no alarm will sound if the cable is cut. Additional surface sensor for the WaterBug 200 or WaterBug 350 models.

The standard Under Carpet Water probe is unsupervised and can be connected to the full line of WaterBug products. Alarm will sound when water is detected but no alarm will sound if the cable is cut. Under carpet water sensor. Accessory for: WaterBug WB-200 WaterBug WB-350 WaterBug WB-800

Supervised surface water sensor for use with the WaterBug 8 zone water detection monitor (WB-800) or the EnviroAlert (EA200, EA400, OR EA800-ip). Stable surface mount design. Supervised probes will alarm if wire is severed as well as when water is detected. Maximum recommended cable run [22 AWG twisted pair] 500’ (152.

The supervised under carpet water sensor can be connected to the EnviroAlert products as well as the WB-800. The alarm will be activated if water is present as well as if the cable is cut. Supervised under carpet water sensor for the WaterBug 800, EnviroAlert 200, EnviroAlert 400, and EnviroAlert EA800-ip.

The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensor probes wired in parallel, up to 100 feet away using 22-18 AWG twisted pair. Each sensor probe has two contacts.

Old Code: 1047, New Code: WB350 Use with your Sensaphone for invaluable protection against costly water damage!  The model WB-350 operates on a 9-volt transistor battery (Not included) has an open collector output that can be connected to alarm panels, bells, dialers, etc.

12 Volt transformer for stand-alone applications that do not pull power from an alarm panel. Accessory for: EnviroAlert EA200-12 EnviroAlert EA400-12 EnviroAlert EA800-ip EnviroAlert EA800 (discontinued) WaterBug WB-200 WaterBug WB-800 Vehicle Alert (discontinued)

The Winland HAIII+ is a sensor used for monitoring remote locations for rising or falling rates of humidity. A sensing element electronically detects the ambient room humidity to help maintain climate control, even when you aren't in the room. The HAIII+ is designed and approved to be used with the EnviroAlert® family of monitoring devices including the EA200-12 & EA400-12.

Winland’s remote probes are available in high and low temp ranges as well as stainless steel or waterproof options. These can accommodate many applications: coolers and freezers, computer rooms and computer equipment, cell tower sites, residential and vacation homes, etc. (Probe accuracy: ±0.

Winland’s remote probes are available in high and low temp ranges as well as stainless steel or waterproof options. These can accommodate many applications: coolers and freezers, computer rooms and computer equipment, cell tower sites, residential and vacation homes, etc. (Probe accuracy: ±0.

Winland’s remote probes are available in high and low temp ranges as well as stainless steel or waterproof options. These can accommodate many applications: coolers and freezers, computer rooms and computer equipment, cell tower sites, residential and vacation homes, etc. (Probe accuracy: ±0.

Winland’s remote probes are available in high and low temp ranges as well as stainless steel or waterproof options. These can accommodate many applications: coolers and freezers, computer rooms and computer equipment, cell tower sites, residential and vacation homes, etc. (Probe accuracy: ±0.