Dakota Alert

Expand your Dakota 4000 series driveway alarm or alert system by adding the DCPT-4000 magnetic probe vehicle sensor with wireless transmitter.  The vehicle probe is buried along side or under the driveway and the included cable connects to the wireless transmitter which can be mounted on a wall, pole or tree.

Expand your Dakota 4000 series driveway alarm or alert system by adding the DCPT-4000 magnetic probe vehicle sensor with wireless transmitter.  The vehicle probe is buried along side or under the driveway and the included cable connects to the wireless transmitter which can be mounted on a wall, pole or tree.

The DCRH-4000 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the DCR-4000 receiver up to 1 mile away*. The transmitter is weatherproof and meant for exterior locations.

The SBB-4000 is a solar powered wireless infrared break beam sensor that is simple to install and requires no wiring. This sensor is an add-on sensor for the SBA-4000 or any other systems using the DCR-4000. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Each beam unit has two solar panels to help ensure proper charging throughout the day.

The DCRH-4000 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the DCR-4000 receiver up to 1 mile away*. The transmitter is weatherproof and meant for exterior locations.