The Venstar Remote Indoor Temperature Sensor w/ Override (ACC0401) offers the user ability to change to Occupied mode for after hours heating or cooling. It will measure indoor-air temperature at a remote location from the thermostat. It is a digital sensor designed for use with Venstar thermostats. It can be used with the Venstar T1800, T1900, T2700, and T2900 thermostats.

The sensor will sense room temperature where it is installed. The thermostat will control to the remote temperature sensor reading and show a blinking degree icon next to the temperature display on the thermostat..

• The remote temperature sensor with override button measures indoor air temperature at a location separate from the thermostat.
• This sensor is a three-wire, digital sensor. On commercial thermostats, the sensors override button is used to change the thermostat from unoccupied to occupied mode to provide after hours heating or cooling.
• Acceptable Wire Types: CAT5, CAT5e, or CAT6 network communication cable, unshielded with 4 twisted pairs of 24 gage solid wire
• Maximum distance between sensor and thermostat using 24 gauge wire — 250 ft

 

Venstar Remote Indoor Temperature Sensor w/ Override (ACC0401) Manual