Fibaro

FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

Perfect for monitoring areas that are prone to water leaks, such as the water heater closet or bathroom, the Fibaro Z-Wave Flood Sensor alerts you when it detects moisture. It also features a temperature sensor and tilt sensor, so you can receive temperature and tamper alerts. When any one of these three conditions is triggered, the Flood Sensor provides an LED alert, sounds a built-in siren, and sends an alarm signal to your Z-Wave network.

The Fibaro RGBW Controller is a universal, Z-Wave compatible RGB / RGBW controller. Fibaro RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V - 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc.