Misc Accessories

This accessory is strongly recommended for Sensaphone autodialers as well as any other valuable piece of electronic equipment, especially if it hooks up to a phone line. Electronic equipment very often gets damaged by electrical surges through the phone line. Protect your valuable equipment with this two outlet surge protector with retractable plug and phone line protection (line/phone/modem slots).

The soil moisture sensor determines volumetric water content (VWC) by measuring the dielectric constant of the media using capacitance/frequency domain technology. It minimizes salinity and textural effects, making it accurate in almost any soil or soil-less media. Factory calibrations are included for mineral soils, potting soils, and rockwool.

A universal design monitors differential or static pressures in commercial buildings, these sensors offer exceptional job-site flexibility. Excellent tolerance to overpressure and vibration reduces field failures. High accuracy digital sensor maintains calibration and reduces callbacks. The sensors monitor positive and negative pressure for application versatility and the LCD is ideal for set-up, troubleshooting, and measuring.

A universal design monitors differential or static pressures in commercial buildings, these sensors offer exceptional job-site flexibility. Excellent tolerance to overpressure and vibration reduces field failures. High accuracy digital sensor maintains calibration and reduces callbacks. The sensors monitor positive and negative pressure for application versatility and the LCD is ideal for set-up, troubleshooting, and measuring.

The Sensaphone Pressure Sensor can be used to measure and detect loss of pressure in many applications. An alarm from the pressure sensor can indicate a problem with a pump, a possible clogged influent line, loss of suction, a downstream clog or perhaps a burst pipe. Any of those failures can cause a pump motor to overheat and warp.

The Ethernet to WiFi Adapter is a high-speed, long-range outdoor wireless bridge that is an ideal solution for adding Wi-Fi connectivity to any network based Sensaphone. This is a cost effective solution when faced with running communication cable or trenching long runs of alarm wire to the Sensaphone.

Unshielded wire sold by the foot. Use to wire accessories to a Sensaphone or security system. Specify any length up to 500ft.

Sensaphone FGD-0221 USB to RS-232 Converter for use with Sensaphone 2000, Sensaphone SCADA 3000, Sensaphone Skymetry, and Sensaphone IMS models. .

Sensaphone IMS-4850 Dry Contact Bridge (N/O, N/C) for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS Dry Contact Bridge allows you to connect a dry contact alarm from any device to your Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node. The Dry Contact Bridge is compatible with Normally Open and Normally Closed contacts.

Sensaphone IMS-4851 4-20mA Bridge for Sensaphone IMS-4000 or Sensaphone IMS-1000 The IMS 4-20mA Bridge allows you to connect a 4-20mA transducer to your Sensaphone IMS-1000 or Sensaphone IMS-4000 Host or Sensaphone IMS-4000 Node. The 4-20mA Bridge features optical isolation between the input and the IMS, which ensures trouble-free operation and safety.

The Sensaphone IMS-4863 Airflow sensor is designed to monitor for the presence or absence of cool moving air. This is especially useful for monitoring air conditioning systems. The sensor can provide relative air flow as a percentage from 0 to 100. The sensor is compatible with both the Sensaphone IMS-1000 and Sensaphone IMS-4000 devices.

The WSG30 Wireless 4-20mA sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter, 4-20mA input and a 24V loop power supply. The sensor can be used to monitor the output of any 4-20mA transducer. The sensor comes with a plug-in power supply and three AA alkaline batteries which will power the sensor for several hours if main AC power fails.

The WSG Wireless Dry Contact sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and input terminals for connecting to any normally-open or normally closed output. (Use of this device with solid-state outputs is not recommended) The sensor comes with two AA alkaline batteries which will power the sensor for up to two years.

Sensaphone IMS-4405 RJ-45 F/F Coupler Kit (4) for Sensaphone IMS-4000 or IMS-1000 This is a special order item.

Sensaphone IMS-4406 Wall Mount Kit for Sensaphone IMS-4000 The Wall bracket allows the IMS-4000 Host or Node to be mounted to any wall. It comes with (4) plastic drywall anchors and (4) #6 metal tapping screws. This is a special order item.