Automatic Water Shut off Valves

Eltek washing machine emergency shutoff hoses catch leaks and shuts off the water supply to your washing machine to prevent damage. Eltek's double hose design shuts off the water when there is a leak in the inner hose without allowing water to leak onto the floor.

Water Hero 1 year of communication service.

The Eltek WaterBlock shutoff system for toilets gives you piece of mind knowing that you will be protected from any toilet overflows. The WaterBlock system will monitor the water coming into the toilet and shutoff the water if it is filling too long. Includes adapters needed for vertical installation on a toilet.

The Eltek WaterBlock shutoff system for toilets gives you piece of mind knowing that you will be protected from any toilet overflows. The WaterBlock system will monitor the water coming into the toilet and shutoff the water if it is filling too long. Includes adapters needed for horizontal installation on a toilet.

The RIB Relay for 220 Volt Circuit (RIB02BDC) provides a communication interface between the FloLogic System and 240VAC devices such as well pumps and water heaters in order to cut power to devices when the FloLogic System turns off the water.

Flologic replacement communication cables (replaces original comm cable). This cable is for the connection from valve to control panel.

System battery for use with normal operation and provides back-up power in the event of loss of A/C. Works with all Flologic 3.0 and 3.5 systems. Sealed lead acid battery, 12V.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

Replacement valve for you Dynaquip Watercop system. Can be used for the Classic, Leakstop, or zwave systems. Use this item to replace your existing control valve or in the development of a new automatic shut-off system. The valve is available in 4 sizes: 1/2", 3/4", 1" and 11/4". NOTE: Lead-free valves are approved for sale in all U.

The Valvin V100L is designed specifically for detecting and preventing tank related leaks and comes with a leak sensor mounted to the Valvin fill valve. These preventable leaks can be from a variety of causes: A stuck open flapper caused by a bound up chain or stuck down flush handle (will waste about 200 gallons per hour).

Wifi module connects to any FloodStop controller, and will send SMS text messages and/or emails whenever the FloodStop triggers. No subscription. Purchase price covers all cost. Can have 2 phone numbers for text and 5 different email addresses.

WaterBlock 1/4" or 3/8" system is great for use on refrigerators with ice makers and water dispensers. This is also good for use with water filters. The WaterBlock system will give you peace of mind and protection from leaks from your ice maker or water dispenser.

WaterBlock 1/4" or 3/8" system is great for use on refrigerators with ice makers and water dispensers. This is also good for use with water filters. The WaterBlock system will give you peace of mind and protection from leaks from your ice maker or water dispenser.

Newly redesigned WaterCop Classic flood sensors are placed in areas that are susceptible to leaks such as water heaters, washing machines, ice makers/refrigerators, sinks and toilets. When water contacts the sensor, a wireless signal is sent to the WaterCop Classic shut-off valve installed on the main water supply to close and stop the flow of water to the leak point.

Monitor specific leak prone areas within the home for unwanted and potentially damaging water accumulation of internal flooding Flood sensors feature a robust 418MHz radio transmitter chipset with up to a 200 foot operating range, user adjustable digital security codes, and operate on either two (2) AA batteries or an optional AC power adapter.

Certain applications or leak detection requirements may require the use of this Sensing Rope in place of traditional FloodMaster sensor "pucks" – most notably when a wider area of leak detection is desired. This highly absorbent water sensing rope is constructed from two twisted metal conductor wires that are insulated from one another and surrounded by a polyethylene mesh braid jacket.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

Fits all FM-0xx Series Units. Up to 5 additional sensor pucks can be added to an existing unit.

For use with AVD45C Automatic phone Dialer model Provides 24 hour back-up power in the event of a power outage Automatically recharges