Sensaphone Applications: Residential
What's Important In Your HOME?
- Freezing Pipes
- Water In The Basement
- Smoke and Fire
- Power Failure
- Security
Go to Vacation Home Remote Monitoring to learn more about how Sensaphone can help you remotely monitor you primary residence or vacation home.
Starter Solution | ||
The Sensaphone Model 400 provides the important functions that you need to monitor your vacation home, cabin, or primary home. It has a built-in temperature sensor that you can program for any temperature level you need to warn for potential frozen pipes. The Sensaphone 400 will also detect power failures and even includes a microphone to listen for the sound of a smoke detector. If any problems are detected, it will make four phone calls to you, your family, friends, or neighbors to announce the problem in your own customized voice. | ||
The Sensaphone
2.8K Weatherproof Temperature Probe will add the capability to monitor
the outdoor temperature or another temperature location within your
house.
|
||
Place the
Sensaphone Water Detection Sensor - Flood Sensor in your basement to
detect water on the floor from any type of pipe leak or sump pump overflow.
|
||
Other Sensaphone Solutions | ||
Upgrading to the Sensaphone Model
800 will provide for eight monitored conditions instead of four on the
Sensaphone Model 400. The Sensaphone 800 can also make phone calls to
eight people instead of four.
|
||
The Sensaphone
Model 2800 adds the ability to use wireless sensors in addition to hard–wired
sensors. It can monitor up to 4 hard–wired, plus four wireless
sensors and report alarms to eight custom voice phone calls. A sealed
Nema-4X outdoor enclosure and rechargeable battery backup is also included
with the Sensaphone 2800.
|
||
Recommended Accessories | ||
The Sensaphone Humidistat Humidity
Detector detects high or low humidity inside the residence.
|
||
The Sensaphone Humidity Transmitter
is a low profile humidity transducer that transmits actual humidity
levels to the Sensaphone. (Not compatible with Sensaphone 400/800)
|
||
The Sensaphone Dual Setback Thermostat
replaces an existing thermostat to provide separate temperature set
points for Home and Away. When used with the Sensaphone 400 or 800,
you can remotely change the temperature of your home between the Home
and Away settings before your arrival.
|
||
The Sensaphone Power Out Alert can
monitor for power outages by plugging the unit into any 110VAC outlet.
|
||
The Sensaphone Smoke Detector monitors
for the presence of smoke inside the residence.
|
||
The Sensaphone Zone Water Detector-Flood
Sensor can be used to detect the presence of water on a floor or inside
a false ceiling. It comes with 10' of WaterRope that is capable of covering
a larger area then FGD-0013.
|
||
The Sensaphone Magnetic Reed Switch
is used to detect any unauthorized entry or intrusion. Typically installed
on door or windows, several switches may be wired in series.
|
||
The Sensaphone Passive Infra-Red
Motion Detector detects movement in a specific area to monitor for unauthorized
entry or intrusion. It covers approximately forty feet of area.
|
||
FGD-0230 Sensaphone Xlink Bluetooth Cell Phone Cellular Interface |
The Sensaphone The XLink Bluetooth
Cell Phone Cellular Interface allows your Sensaphone to dial and receive
calls using any cell phone with Bluetooth technology. For example, suppose
land-line telephone service was unavailable at the Sensaphone's location.
By using the XLink you can provide telephone service to your Sensaphone
simply by locating a cell phone next to the device. The XLink will send
all incoming calls to the Sensaphone and when the Sensaphone needs to
dial out the call will be seamlessly completed through the cell phone.
The XLink is simply a wireless (Bluetooth) link between your Sensaphone
and a cellular phone.
|
|
Recommended Wireless Accessories | ||
The Sensaphone 2800 Wireless Temperature
Sensor wirelessly monitors temperatures from -109 to 115 F inside the
residence.
|
||
The Sensaphone 2800 Wireless Humidity
Sensor monitors humidity from 0 to 95% RH.
|
||
The Sensaphone 2800 Wireless 4-20mA
Sensor can be used to monitor the output of any 4-20mA transducer.
|
||
The Sensaphone 2800 Wireless Dry
Contact Sensor connects to any normally open or normally closed output
via input terminals on the front of the sensor.
|
Shop Sensaphone