| Starter Solution |
|
FGD-W600
Sensaphone
WEB 600
|
 |
With six universal inputs, the Sensaphone Web600 can
be configured to watch your most critical conditions in a small computer
room. This is a Web-based product so current status, programming, and
previous history can all be accessed quickly and conveniently through
a web page. If any conditions deviate from normal, the Sensaphone Web600
will immediately send e-mail alarms, text messages, and even SNMP traps. |
|
FGD-W610-B
Sensaphone
Web 600 Battery Backup
|
 |
Monitoring for power failures in
a computer room is a must, so the battery backup module for the Web600
is highly recommended.
|
|
FGD-0101
Sensaphone
2.8K Weatherproof Temperature Probe
|
 |
The Sensaphone
2.8K Weatherproof Temperature Probe provides real time temperature sensing
with programmable alarm limits.
|
|
FGD-0056
Sensaphone
Zone Water Detector - Flood Sensor
|
 |
The Sensaphone Zone Water
Detector- Flood Sensor allows you to detect water on the floor. The
alarm will trip if water touches anywhere along the 10 foot rope. The
rope can even be extended to cover large areas or to isolate an area
to detect water leaks.
|
|
FGD-0052
Sensaphone
Humidity Transmitter
|
 |
Proper humidity
levels are a key factor in the life of your servers. The Sensaphone
Humidity Transmitter provides a real time humidity measurement so that
both high and low levels can be custom programmed.
|
| Other Sensaphone Solutions |
|
IMS-1000
Sensaphone
IMS-1000 Internet Remote Monitor
|
 |
The Sensaphone IMS-1000 is similar to the Sensaphone
Web600 in that it is a web-based monitoring solution, but it provides
much more. Instead of monitoring up to six sensors, it can monitor up
to eight. The Sensaphone IMS-1000 also has the option of a phone line
connection in addition to the Ethernet computer network connection.
Even if your computer network is not working, the Sensaphone IMS-1000
can still use a standard phone line to notify of a problem. In addition
to monitoring for physical problems, the Sensaphone IMS-1000 adds the
ability to monitor server availability and alarm on a lack of response
from any network device.
|
|
IMS-4000
Sensaphone
IMS-4000
|
 |
For a wide
area enterprise solution, we recommend the Sensaphone IMS-4000. It is
similar to the Sensaphone IMS-1000 with both the Ethernet connection
and a phone line connection, but is designed for monitoring multiple
locations. The Sensaphone IMS-4000 system is made up of one Host and
up to 31 Nodes that can be spread out over a large area. Each Host or
Node can monitor up to eight sensors, and the group of Hosts and Nodes
can be managed from one common interface. The Nodes can be in a different
room as the Host, or a different building, or even a different country.
The Sensaphone IMS-4000 provides a very modular and expandable remote
monitoring solution.
|
| Recommended IMS Accessories |
|
IMS-4810
Room
Temperature Sensor
|
 |
The Sensaphone Room Temperature Sensor
mounts on any flat surface to measure temperature in the room. User
configurable to degrees C or F.
|
|
IMS-4811
Room
Temp Sensor w/ Display (deg F)
IMS-4813
Room
Temp Sensor w/ Display (deg C)
|
|
The Sensaphone
Room Temperature Sensor with Display is an indoor wall mount temperature
sensor with the addition of a local temperature display. Available to
read in degrees F or C.
|
|
IMS-4812
Mini-Temperature
Sensor w/ 7' Cable
|
 |
The Sensaphone Mini-Temperature Sensor
can be used to measure the temperature inside a small space or inside
cabinets.
|
|
IMS-4814
Ultra-Low
Temperature Sensor
|
 |
The Sensaphone Ultra-Low Temperature
Sensor can be used to measure the temperature in extremely low temperature
environments.
|
|
IMS-4820
Room
Humidity Sensor
IMS-4821
Room
Humidity Sensor w/ Display
|
|
The Sensaphone Room Humidity Sensor
mounts on a wall to measure relative humidity in a room.
|
|
IMS-4830
Water Sensor w/ 10' Rope
|
 |
The Sensaphone Water Sensor detects
the presence of water on the floor. Includes ten feet of water sensing
rope.
|
|
IMS-4840
External
Power Sensor
|
 |
The Sensaphone External Power Sensor adds additional
power failure monitoring to the IMS main unit.
|
|
IMS-4841
IMS
AC Current Sensor, up to 15 Amps
IMS-4842
IMS
AC Current Sensor, up to 20 Amps
|
|
The Sensaphone IMS AC Current Sensor
connects in series with servers or other network equipment to monitor
how much current is being used. Available to monitor 15 or 20 amps.
|
|
IMS-4850
Dry
Contact Bridge
|
 |
The Sensaphone Dry Contact Bridge
allows any dry contact to be interfaced with any of the IMS systems.
|
|
IMS-4851
4-20mA
Bridge
|
 |
The Sensaphone 4-20mA Bridge allows
any 4-20mA analog transducer to be interfaced with any of the IMS units.
|
|
IMS-4860
Magnetic
Reed Sensor w/ Bridge
|
 |
The Sensaphone Magnetic Reed Sensor
can be used to monitor a door to a room for unauthorized entry.
|
|
IMS-4861
Passive
Infra-Red Motion Detector
|
 |
The Sensaphone Passive Infra-Red
Motion Detector can be used to monitor unauthorized access into data
centers.
|
|
IMS-4862
Smoke
Detector
|
 |
The Sensaphone Smoke Detector detects
smoke independently from the primary fire alarm system.
|
