Wireless Security Systems

Security Yard Sign (no stake) - reflective, 10 inches in diameter

The Dakota Alert Long Range Wireless Push button and Door/Window Sensor can be used in three different modes: Wireless Doorbell Button - In this mode, the doorbell button is mounted where needed Wireless Door Windows Open Sensor - in this mode the included magnetic sensor is mounted on a door or window to detect when it has opened Wireless Universal Transmitter - in this mode there is an input on the wireless transmitter that accepts a Normally Open or Normally Closed contact In any of these modes, when triggered, a wireless signal is sent to the wireless receiver where the LED light will flash and your choice of tunes/tones will be played.

The Dakota Alert Long Range Wireless Push button and Door/Window Sensor can be used in three different modes: Wireless Doorbell Button - In this mode, the doorbell button is mounted where needed Wireless Door Windows Open Sensor - in this mode the included magnetic sensor is mounted on a door or window to detect when it has opened Wireless Universal Transmitter - in this mode there is an input on the wireless transmitter that accepts a Normally Open or Normally Closed contact In any of these modes, when triggered, a wireless signal is sent to the wireless receiver where the LED light will flash and your choice of tunes/tones will be played.

The UT-4000 is a simple to use universal-transmitter that is compatible with Dakota Alert 4000 series receivers. It can be used like a wireless doorbell or wireless gate entrance button when used with a Dakota 4000 receiver. It also comes with a magnet and can be mounted to a door frame, window frame, cupboard or cabinet to monitor when any of these have been opened.

The Wireless Alert CM monitors whether a volt-free contact, such as a relay or volt-free switch is open or closed. The device body can be secured in position using an adhesive pad (supplied) and is provided with 4.92ft (1.5m) of cable with bare ends, ready to connect to your equipment or switch. The device can be set to trigger a notification email, sent to a user-selected address, if the monitored contact opens, closes, or both. The user can also configure delays (between 1 minute and 12 hours), whereby the contact must remain opened or closed for a certain period of time before an alert is sent. In addition to this, the device can send a scheduled summary email detailing number of alert events, percentage of contact open and closed time, and battery level.

This easy to install, “out-of-the-box”, system utilizes cutting-edge technologies to protect your home or small business against intrusion and safety hazards.This system keeps you simply safe and worry free! Easy to operate and robust, The WiComm  security system is designed to provide you with peace of mind.


Free 4-pack security Decals with purchase!

The Risco WiComm 2-way Wireless Door/ Window Contact is ideal for wireless perimeter door/window protection in residential and small commercial applications. For use with the Risco Wicomm Internet/Cellular Security System. The 2-Way door / window sensor offers protection against opening doors and windows.

The Risco Wicomm Wireless Flood Detector promptly detects and alerts to the presence of even small water leaks. From the kitchen to a basement, from a water tank to a refrigerator, the Wireless Flood Detector is easy to install and can save home and business owners untold damages. In the case of a leak, the Wireless Flood Detector will send a notification immediately to the user's smartphone device.

This Risco WiComm Proximity sensor is a personal electronic disc you can assign to users that when presented close to a WiComm proximity-supported keypad it functions the same as entering a personal user code. For easy entry when hands are full or when you want to keep the user code private from those you may be entering with.

The Wireless Glass Break is an additional solution for perimeter protection that detects intruders while they are still outside. Based on an advanced glass breaking pattern analysis of both low and high frequency channels it detects the breaking of all common glass types and thicknesses while disregarding non framed glass breakage and other sources of false alarms.

The VTech VC7003 is a Motion Sensor that can detect a motion occurred at a distance of up to 40 feet (12 meters). The Motion sensor is more sensitive in detecting motions crossing the space in front of the sensor than that moving towards the sensor. You can program the monitoring system to notify you when it detects motion in your home.

STI Wireless Chimes greet your visitors with a pleasant chime and lets you know when the door opens or a person enters the detection zone. All chimes are compatible with each other. Distinguish between front and back doors by adding sensors and selecting a different chime on each. Transmitters have up to 500’ operating range.

Additional transmitter and magnet to help monitor doors. Alarm or chime sounds when transmitter and magnet are separated. Uses a 6 volt alkaline battery (installed) and has 32 frequency codes to help reduce interference. There are thirteen selectable sounds (with the push of a button) on each transmitter.

The wireless ViTRON is a wireless glassbreak detector that protects all glass types whether it is plate, tempered, laminated or wired. It works with the WisDom Wireless Security System.

Four Security Decals - reflective, 3 inches in diameter

Strobe can be independently wired from siren Single tone piezo siren - warble Strobe flashes at same rate as siren sounding Mounts onto single gang box or can be surface mounted with two screws Wire directly to WisDom. WisDom will provide power to the unit. When used with a Sensaphone output relay, you will need to supply power to the siren separately (XFR-0024).

Extra magnets for use with Door/Window sensors. Use them to create window gaps in which the window can be open to a certain point without breaking the magnetic field. Comes with adhesive backing and screws.